Please select Diesel or Petrol in the drop down box.
Removes carbon from inside diesel or petrol engines, including both turbo and non turbo. The removed carbon allows for restored power, economy and reduces emissions.
Easy to use - no direct access to the turbo needed, simply spray into the inlet after the air filter.
Ideal for curing:
Failed Emissions MOT test
Poor Fuel Economy
Limp Home Mode
Check Engine Light Faults
Stuck Turbo nozzles/vanes
This is the Revive starter kit which includes:
750ml Revive Fluid
1 x Sprayer Nozzle
Revive is a safe water based, non toxic, non corrosive and non flammable fluid, using technology developed and used for the cleaning and maintenance of aviation jet engines, power station turbines, large marine diesel engines and now automotive engines.
The treatment is sprayed into the vehicle's intake system before the turbo inlet whilst the engine is running. As the fluid passes through the engine system it locks on to built up oily/carbon deposits and strips away a surface layer. These tiny carbonised particles are then carried away out through the exhaust system, without blocking catalysts and filters.
By performing the 3 step process of the Revive treatment, carbonised layers are removed gradually, making the engine cleaning process very safe.
How to use:
Starting with a cold engine, unclip the intake trunking after the air filter and MAF sensor.
(This 3 step process can be completed in just 10 minutes)
Spray Revive in 3 doses of 250ml into the intake, 1st with the engine running at 2200 RPM, next at 1800 RPM, stop the engine for 3 minutes, re-start the engine then finally at 2000 RPM.
Keep the engine running for a few more minutes until the Revive has worked out of the system.
Take the vehicle for a brisk drive of about 20 minutes, this allows Revive to do its work.
The Revive cleaning process can be performed before a service, this allows the vehicle to be checked over and filled with clean oil.
REPAIR WITH REVIVE
Revive is used to clean engine systems that already have problems caused by soot & oily build up.
By performing three Revive cleaning doses on the vehicle, carbonised layers are removed gradually, making the engine cleaning process very safe.
RESTORES ECONOMY, POWER & EMISSIONS Cleaning the turbo and other engine internals helps restore fuel economy, regains lost power and reduce exhaust emissions.
VARIABLE VANE TURBOS Variable nozzle / vane technology can be a major cause of turbo problems due to sticking turbo vanes, cleaning with Revive helps remove soot & oil from the mechanism to restore normal movement.